Diamond tools for glass/ceramic processing
In this subdirectory you will find the right tools for processing all types of glass and ceramics. These areas are divided as follows:
Water flushing sleeves with ball bearings
With these water flushing sleeves, normal drilling machines can be converted so that the diamond hollow drills or diamond countersinks are cooled with water from the inside and thus optimize the drilling process.
Diamond countersink 90 °
Bores are provided with a chamfer using diamond countersinks. Either to break edges or to countersink screws or fittings. Our diamond countersinks are available in two versions, one as a slip-on countersink for diamond hollow drills and the second as a separate countersink with cooling holes in the countersink area.
Diamond hollow drill for glass/ceramic
Diamond hollow drills are used for drilling in glass and ceramics. They should only be used on machines with internal water cooling. If such machines are not available, they can be retrofitted with our water flushing canister.
Diamond cutting discs for different types of material
Diamond cutting discs are used to cut glass and ceramics. Our diamond cutting discs are manufactured with metal and other bonds, in different diameters, cutting widths, coating thicknesses and grits.
Standard diamond grinding points with galvanic coating
Our standard range of diamond grinding points is highly recommended for grinding glass or ceramics. The advantage lies in the large variety and low prices. The wide range of dimensions, shapes and grits allow their use in most cases.
Standard diamond files with electroplated coating
Diamond files are required for processing hard materials and our standard diamond files leave almost nothing to be desired. A large selection of diamond grits is also available.
Diamond polishing pastes in 10 grain sizes
Diamond polishing pastes are used for finishing surfaces with very low peak-to-valley heights. Our diamond polishing pastes are highly concentrated, come in 10 grit sizes and can be diluted with oil or water to suit your needs.
Glazier's diamonds in two versions
For manual glass cutting with a diamond glass cutter, our Universal type is suitable for straight cuts and our template diamond for curved cuts on the template.
Writing diamonds with special diamonds
Our writing diamonds are used for writing on glass by hand. They are the right tool, especially in the laboratory area, where indelible writing on glass is required.